Glass Shape Edging Machine
Glass shape edging machine is suitable for processing the special-shaped edges and beveled edges of flat glass. This equipment uses a vacuum to suck the glass on the suction cup, and is equipped with a motor to drive the turntable table or independently drive an independent turntable five-disc on the disk to rotate, so that the machine can process special-shaped flat glass with a rotating diameter of 700-2100mm or 100-700mm. The rotating speed of the turntable can be adjusted arbitrarily during work. This machine can also semi-automatically grind simple shaped special-shaped glass by using the air cylinder. When grinding the edges, three grinding wheels can be installed for rough, fine grinding and polishing. When grinding the bevel, install a bowl-shaped grinding wheel, tilt the grinding head backward, adjust the angle of the bevel, and grind the edge according.