» Glass Tempering Furnace » Chemical Glass Tempering Furnace

Chemical Glass Tempering Furnace

Chemical glass tempering furnace is to place the glass in molten salt so that the ions with a smaller radius on the surface of the glass are exchanged with the ions with a larger radius in the molten salt, and finally, a compressive stress layer is formed on both surfaces of the glass, and tension is formed inside the glass. The stress layer achieves the purpose of improving the strength and temperature shock resistance of the glass.

Enquiry

Description

Contents

Chemical Glass Tempering Furnace

Automatic Chemical Tempering Furnace

The glass processed by chemical tempering has high strength, good thermal stability, no deformation on the surface, and no self-explosion.

The chemical tempering technology overcomes the shortcomings of the physical tempering technology. While improving the strength of the glass, it does not affect the optical performance at all. It has the irreplaceable application characteristics of other strengthened glass varieties.

Chemical glass tempering furnace is equipment that will complete the entire chemical tempering process. Its main process is preheating-ion exchange-salt dropping-slow cooling.

Technical Features

Does not change the chemical composition of the glass
Improve the strength of the glass by changing the chemical composition of the glass surface
Effectively improve product quality and efficacy, reduce operating labor, large production capacity, small floor space, high-cost performance.
Closed design, the insulation layer is up to 40cm thick, does not contact the outside cold air, avoids defects such as bursting, deformation, etc., and has a low damage rate.
Customized temperature control module, SCR module output, stable and uniform temperature control, small temperature difference
Suitable for various sizes of glass, such as cover glass, flat glass or large glass sheet such as 400X600mm, 1350X2000mm, etc., especially suitable for the chemical tempering of G2~G6 generation glass.

Technical Parameter

Cycle Time	2~6hours/batch
Equipment load	24h full-day system (2 or 3 shifts per day)
Machine dimension	13000mm(L)x6400mm(W)x5700mm(H)
Liner size	2250mm(L)x1500mm(W)x1800mm(H) (about 10t nitrates can be contained)

Scope of applications:

Electronic product glass, home appliance glass, optical glass, high-strength fireproof glass, aircraft glass, submarine glass. high-speed train glass, etc.